|
Austenization Furnace
PLC
Electrical Control Panel |
- Compound of one
Austenization Furnace with Electrical Power of 80w and one
Salt Furnace of 45w. Production betwen 100
and 150 kg / hour.
Obtaining
Bainitic
structure with high tenacity and strength that are not possible with
traditional heat treating processes (see
graphic)
Advanced electrical
control panel with PLC
and program design to save energy, sincronization with electronic variable
speed devices.
The entire operation es controled by a
small keyboard at the operator's level.
All parts and components are easily
removable for maintenance
Key Advantages
-
High Fatigue Strength with
Minimal Distortion
-
No Fissure in the Thermic Shock
-
High Tenacity and Low Hydrogen
embrittlement
-
High Profitability
-
Low Operation Cost
AUSTEMPERING
(
ISOTERMIC
TREATING )
- Consist of heating steel
to a temperature slighty superior to the critical and later
cooling in a hot salt bath that is maintained at a constant
temperature during a time period sufficient enough to verify the
total transformation of the Austenite
in Bainite. The temperature of the
bath that needs to be superior to the M2 point usually
varies from 250 to 550 ēC. For the treatment to be correct and
the structure to be completely bainitic the cooling in the 1st
phase should be sufficiently fast enough to stop the formation of
perlite
|
|
Salt Furnace
|
